Read/Write Data

This option will allow the user to view the data log data registers directly.  This can be helpful during troubleshooting issues.  This option can only be accessed with the SSi special-level passcode.  Contact Super Systems at 513-772-0060 to obtain the special-level passcode.  The screen will display one-hundred registers at a time, starting at register 0.  To change the starting register, use the up/down arrows on the top number box, or use the numeric keypad that pops up and enter the new register.  The range for the top number box is 0 to 32000.  Values can also be written to the registers by using the two bottom number boxes.  The “Write offset” number box will set the register to write, and the “Write value” number box will set the value to write back to the register.  Click on the Write button to write the value.